[yt-users] Load in ASCII VTK

John ZuHone jzuhone at gmail.com
Tue May 31 10:45:51 PDT 2016


This is probably a good first-pass solution—I’m finding at first glance that the changes to the Athena frontend to handle ASCII files are not trivial. Doable, but not trivial. 

Also, Lukas, is your data vertex-centered or cell-centered?

> On May 31, 2016, at 1:43 PM, Stephanie Tonnesen <stonnes at gmail.com> wrote:
> 
> Hi Lukas,
> 
> If I were in your shoes, probably the first thing I would do is just use python to change your ascii file into a binary file outside yt, then see what happens when you try and load the binary version into yt.  If the problem is just the file type that might be the easiest fix, and python help pages make me think that changing your file from ascii to binary is not super difficult.  
> 
> Looking at my old Athena vtk files, there is a lot more info in the header than you seem to have.  You may have to manually put equivalent lines in the header, but it seems pretty doable.  
> 
> It may end up that you should just edit yt, but in the short term it may be easier to make the file format changes necessary to use the athena reader.  Figuring out what those changes are may also help when trying to update a frontend reader.  
> 
> Best,
> Stephanie
> 
> 
> --
> Dr. Stephanie Tonnesen
> Alvin E. Nashman Postdoctoral Fellow
> Carnegie Observatories, Pasadena, CA
> stonnes at gmail.com <mailto:stonnes at gmail.com>
> 
> On Sun, May 29, 2016 at 1:36 PM, Lukas Bystricky <lukasbystricky at gmail.com <mailto:lukasbystricky at gmail.com>> wrote:
> Thanks John for your quick response. I've attached a sample file VTK file that I have. This is from a finite difference simulation, so grids will always be uniform. 
> 
> I found the Athena source code for how they write their VTK files (http://www.astro.princeton.edu/~jstone/Athena/doxygen/html.with_source/output__vtk_8c_source.html <http://www.astro.princeton.edu/~jstone/Athena/doxygen/html.with_source/output__vtk_8c_source.html>) and it looks similar to mine, except that theirs is in binary and they use a different dataset structure. 
> 
> I'm an extremely new YT user (and I've never done any YT development), so I don't know how much help I'd be but if you'd like a hand developing a new frontend let me know. 
> 
> On Sun, May 29, 2016 at 4:08 PM, John ZuHone <jzuhone at gmail.com <mailto:jzuhone at gmail.com>> wrote:
> Hi Lukas,
> 
> I think Nathan's point was that there are other people working on new frontends currently, and they are smoothing over the instructions for how to make a new one.
> 
> Probably the best thing to do in the short run is to figure out how to read your data in using the Athena frontend. If you have a sample dataset you can post somewhere for us to try that would help.
> 
> I nominally maintain the Athena frontend, but I don't have a ton of time at the moment, so it sort of depends on how difficult it will be to make the changes in terms of how long it will take. If you're up for giving it a shot yourself I'm happy to give you pointers.
> 
> Is this uniformly gridded data, or something else?
> 
> Best,
> 
> John
> 
> 
> ================================
> John ZuHone, Chandra/ACIS Operations	
> Harvard-Smithsonian Center for Astrophysics
> 
> 60 Garden St. <>, MS-67       (w) 617-496-1816 <tel:617-496-1816>
> Cambridge, MA 02138 <>.     (m) 781-708-5004 <tel:781-708-5004>
> 
> john.zuhone at cfa.harvard.edu <mailto:john.zuhone at cfa.harvard.edu>
> http://hea-www.cfa.harvard.edu/~jzuhone <http://hea-www.cfa.harvard.edu/~jzuhone>
> ================================
> 
> On May 29, 2016, at 3:41 PM, Lukas Bystricky <lukasbystricky at gmail.com <mailto:lukasbystricky at gmail.com>> wrote:
> 
>> Hello all,
>> 
>> This is a followup to my question here (http://lists.spacepope.org/pipermail/yt-users-spacepope.org/2016-May/007830.html <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/2016-May/007830.html>). Apologies, but I can't seem to figure out how to reply since I was never sent an e-mail for either my question or Nathan's response. 
>> 
>> I'm trying to load a legacy VTK file into YT (see format description http://www.vtk.org/wp-content/uploads/2015/04/file-formats.pdf <http://www.vtk.org/wp-content/uploads/2015/04/file-formats.pdf>), but I when I try:
>> 
>> ds = yt.load("file.vtk")
>> I get the error:
>> traceback (most recent call last):
>> File "visualization.py", line 3, in <module>
>> ds = yt.load("file.vtk")
>> File "C:\Users\Dave\Anaconda2\lib\site-packages\yt\convenience.py", line 84, in load
>> return candidates[0](*args, **kwargs)
>> File
>> "C:\Users\Dave\Anaconda2\lib\site-packages\yt\frontends\athena\data_structures.py",
>> line 470, in __init__
>> Dataset.__init__(self, filename, dataset_type,
>> units_override=units_override)
>> File
>> "C:\Users\Dave\Anaconda2\lib\site-packages\yt\data_objects\static_output.py",
>> line 190, in __init__
>>     self._parse_parameter_file()
>>   File
>> "C:\Users\Dave\Anaconda2\lib\site-packages\yt\frontends\athena\data_structures.py",
>> line 528, in _parse_parameter_file
>>      self.domain_left_edge = grid['left_edge']
>> KeyError: 'left_edge'
>> 
>> Nathan Goldbaum pointed out is his answer that YT can read in VTK files from Athena. I looked into this and it seems like the difference between my file and Athena's files is that mine are ASCII while Athena's are binary. Is that right? 
>> 
>> On another note, Nathan also pointed out there are people working on a frontend for the VTK format I'm using. Could I provide any help there?
>> 
>> Thanks again, and sorry for the double posting. 
>> 
>> Lukas
>> 
>> _______________________________________________
>> yt-users mailing list
>> yt-users at lists.spacepope.org <mailto:yt-users at lists.spacepope.org>
>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> 
> _______________________________________________
> yt-users mailing list
> yt-users at lists.spacepope.org <mailto:yt-users at lists.spacepope.org>
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> 
> 
> 
> _______________________________________________
> yt-users mailing list
> yt-users at lists.spacepope.org <mailto:yt-users at lists.spacepope.org>
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> 
> 
> _______________________________________________
> yt-users mailing list
> yt-users at lists.spacepope.org
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/20160531/b5d9d3ba/attachment-0001.htm>


More information about the yt-users mailing list