[yt-users] Label cut in multiplot

[trobolo dinni]

Hi Suoqing,

yes, that worked.

Thank you very much for the help,
Roberto


On 22 June 2016 at 13:52, Suoqing Ji <suoqing at physics.ucsb.edu> wrote:

> Hi Roberto,
>
> Could you try this:
>
> plt.savefig(plot_dir+'CELMO-Density_difftimes.png', bbox_inches="tight")
>
> Best wishes,
> --
> Suoqing JI
> Ph.D Candidate
> Department of Physics
> University of California, Santa Barbara
> http://web.physics.ucsb.edu/~suoqing
>
> On Jun 21, 2016, at 6:23 PM, trobolo dinni <
> trobolo.trobolo.dinni5 at gmail.com> wrote:
>
> Dear yt users,
>
> I am running the following script:
>
> *from yt.mods import **
> *import matplotlib.pyplot as plt*
> *import numpy as np*
> *import math*
> *import os*
> *from mpl_toolkits.axes_grid1 import AxesGrid*
>
> *#enable/disables yt output*
> *mylog.disabled = True #no yt screen outputs*
> *#mylog.disabled = False*
>
> *#SIMULATIONS: this is the P12 but in a bigger box with 512 on a side.*
> *root_dir =
> "/disks/ceres/makemake/acomp/riaconi/rxi552/Binary-JC_primary-0.6Msun_companion-1_stellar_radii-512grid/"*
> *fns =
> [root_dir+"DD0014/data0014",root_dir+"DD0030/data0030",root_dir+"DD0041/data0041"]*
>
> *plot_dir = "/disks/ceres/makemake/acomp/riaconi/shared/"*
>
> *#setup for each plot in the figure (grid[i] will point to plot i)*
> *#axes_pad is padding between axes in inches*
> *fig = plt.figure()*
> *grid = AxesGrid(fig, (0.075,0.075,0.85,0.85),*
> * nrows_ncols = (1, 3),*
> * axes_pad = 0.15,*
> * label_mode = "L",*
> * share_all = False,*
> * cbar_location="right",*
> * cbar_mode="single",*
> * cbar_size="3%",*
> * cbar_pad="0%")*
>
> *for i, fn in enumerate(fns):*
> *    pf = load(fn)*
> *    common_envelope = pf.h.all_data()*
> *    print "|----------|"*
> *    print "simulation time: ", pf.current_time, "time code units"*
> *    print "|----------|"*
>
> *    s = SlicePlot(pf,'z',fields=["Density"])*
> *    plot = s.plots['Density']*
>
> *    plot.figure = fig*
> *    plot.axes = grid[i].axes*
> *    plot.cax = grid.cbar_axes[i]*
> *    s._setup_plots()*
>
> *plt.savefig(plot_dir+'CELMO-Density_difftimes.png')*
>
> However, when I visualise my image or insert it in a latex document the
> label on the right results cut off (see attached image).
>
> I am not able to find a solution for this and I would like to ask if
> anyone solved this problem before or has any suggestion on how to solve it.
>
> Cheers,
> Roberto
> <CELMO-Density_difftimes.png>
> _______________________________________________
> yt-users mailing list
> yt-users at lists.spacepope.org
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
>
>
>
> _______________________________________________
> yt-users mailing list
> yt-users at lists.spacepope.org
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/20160622/bb6b69a7/attachment.html>