[yt-dev] off axis projection in yt-3.0

[Nathan Goldbaum]

How did you load the data into yt?  In particular, did you use a units dictionary?

On November 14, 2013 at 1:30:46 PM, nick moeckel (nickolas1 at gmail.com) wrote:

The 100 pc box is correct, and the surface density looks fine; the domain is 0 to 1 in all three dimensions.


On Thu, Nov 14, 2013 at 10:24 PM, Matthew Turk <matthewturk at gmail.com> wrote:
Hi Nick,

How do the units compare to what's in your sim? Also, what is your domain extent? My guess is there is an assumption in the octree floating point coordinate generation that is missing a domain_left_edge offset.

Matt

On Nov 14, 2013 4:21 PM, "nick moeckel" <nickolas1 at gmail.com> wrote:
Hi there,

are off axis projections expected to work for all frontends in 3.0? Using Ramses I'm getting some curious results. e.g.
p = OffAxisProjectionPlot(ds, [.1, .1, 1], 'Density', north_vector=[0,1,0])

results in 

http://i.imgur.com/TzTbh7u.png

where the whole simulation seemt to be squished into one quadrant.

best,

Nick






_______________________________________________
yt-dev mailing list
yt-dev at lists.spacepope.org
http://lists.spacepope.org/listinfo.cgi/yt-dev-spacepope.org


_______________________________________________
yt-dev mailing list
yt-dev at lists.spacepope.org
http://lists.spacepope.org/listinfo.cgi/yt-dev-spacepope.org


_______________________________________________  
yt-dev mailing list  
yt-dev at lists.spacepope.org  
http://lists.spacepope.org/listinfo.cgi/yt-dev-spacepope.org  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.spacepope.org/pipermail/yt-dev-spacepope.org/attachments/20131114/135bf632/attachment.htm>